A Strong Wind Energy Industry in Poland in 10 steps
23.04.2024
Two hundred thousand new jobs and PLN 450 billion of added value for the Polish economy – the Polish Wind Energy Association (PWEA) presents its report “Development of the Onshore and Offshore Wind Energy Industry in Poland” and proposes 10 steps without which the achievement of such an ambitious goal will not be possible.
Wind energy today
The Wind Energy Industry has huge development potential throughout the European Union, including Poland. The total capacity of wind farms in the European Union is currently 255 GW, of which 225 GW is onshore power capacity and 30 GW is offshore wind energy capacity. At the end of 2023, Poland’s onshore power capacity amounted to 9.3 GW (+1.8 GW is under construction; we currently do not have offshore wind farms), thus accounting for 3.78% of the total installed capacity in the EU. Such capacity translated into the share of wind energy in the country’s electricity production at a level of 11% in 2022, and in the period January-November 2023 it was almost 13%.
Plans until 2030
The European Union’s ambitious goal is to achieve an installed wind capacity
of 500 GW by 2030. Poland’s goals may be no less ambitious. According to PWEA, the Polish Wind Energy Industry’s development potential by 2030 may range from 21.3 GW to 26.6 GW (12.7-18 GW onshore and 8.6 GW offshore), which would account for 4.26% to 5.32% of installed capacity in the EU.
Such dynamic development would mean that in 2030 employment in onshore wind energy would amount to 50 to 97 thousand FTEs, and the value of orders for products and services in this segment could amount to as much as PLN 80 billion. This would generate an increase in Polish GDP at a level of PLN 70-133 billion, and local content (the share of Polish companies within the supply chain) could reach up to 76%. In the case of offshore wind energy, employment could amount to 63,000 FTEs, the value of investments would amount to almost PLN 100 billion, the value added to GDP would be at the level of PLN 46 billion, and local content would amount to approx. 50 percent.
Almost 70 GW of capacity in 2040?
According to PWEA, the forecast for the development of wind energy until 2040 is 36 GW onshore and 33 GW offshore with the best scenarios for the development of wind technology and with maximum use of potential. These goals are much more ambitious than those set out in the strategic document “National Energy Policy until 2040” updated in June. (PEP2040), referred for pre-consultation. The proposal provides for an increase in capacity to 20 GW onshore and 18 GW offshore.
The maximum plan would translate into 200,000 new jobs, over PLN 450 billion of added value for the Polish economy and would bring almost PLN 100 billion of possible income for Polish companies in the construction phase. In addition, it would create a stable and competitive industry, based on long term International contacts.
“How to do it” in 10 steps
In PWEA’s opinion, in order for the above plans to materialise, it will be necessary to implement the following action plan:
- Update of “Poland’s Energy Policy” to ensure ambitious goals for the production of electricity from RES, including in particular onshore and offshore wind energy in the period until 2050;
- Supplementing “Poland’s Industrial Policy” with provisions on building a strong wind energy industry as an opportunity for the Polish economy and its innovation;
- Update of the “Spatial Development Plan for Poland’s Maritime Areas” in order to identify new areas where it would be possible to implement further offshore wind farm projects;
- Simplification of administrative procedures for the development of onshore and offshore wind farms in order to speed up the implementation of projects and build Poland’s energy independence as soon as possible;
- Support for the development of the Polish Wind Energy industry using existing and new financial mechanisms, including EU funding;
- Preparing the staff necessary for the growing wind industry – providing tailored education and reskilling programs;
- Creation of mechanisms to support the involvement of local producers within the framework of regulations defined at EU level;
- Implementation into National Law the provisions of the Regulation on the establishment of a framework of measures to strengthen the European ecosystem for the production of carbon-neutral technology products (the so-called Net Zero Industry Act – NZIA);
- Implementation of the European Wind Charter in Poland, which will strengthen the wind sector by supporting local supply chains and defining quality criteria in tenders for energy from wind farms;
- Creating appropriate administrative facilities and coordinating work within the Ministries of State Assets, Maritime Economy and Inland Navigation, Climate and Environment, Industry, and Development and Technology.
Source: The PWEA Report, Strategic Document of the Ministry of Climate and Environment “Polish Energy Policy until 2040” and document update
Spis treściTable of contents
- Everything
- News (159)
- Events (112)
- Get Support (79)
- Polish companies (661)
-
PANELTECH SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ
Paneltech is a polish company producing thermal insulation and finishing materials for the construction industry. Many years of experience and investment in modern technological lines have allowed Paneltech to specialise in the production of high quality building materials, including expanded polystyrene, sandwich panels, flashings, elevation cassettes, aluminium joinery, modular coldrooms and coldroom and freezer doors. Paneltech exports products to over 30 countries worldwide.
ArticleThe work-life balance of busy Poles
Poles at the forefront of the most hard-working Europeans
PUH LEDNET BARTOSZ ORLICKI
Machinery and parts thereofIndustrial machinery and mechanical appliances and parts thereofMeasuring instruments and apparatus and parts thereofAgricultural machinery and parts thereofOther instruments and apparatusElectromechanical appliances and parts thereofOther goodsShow allWe are the producer and distributor of HVAC equipment and hydraulic devices. We already export regularly to 7 countries in Europe and casually to many more places. Our main product which makes our brand – NORDIC TEC – Europe-wide known is a Plate Heat Exchanger Set in exclusive offer.
GLOBPLAST SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ
Renovation and construction materialsShow allGLOBPLAST company specialise in the production and distribution of construction profiles made of aluminium, steel and PVC (Poli Vinyl Chloride) as well as the construction mesh, foil and membrane materials for thermal insulation and building insulation.Our original and innovative product is the specialized line of corners and aluminium and PVC profiles strengthened by a special mesh known as IRIS GLASS. This solution is dedicated to demanding internal and external building insulation systems.
-
Article
The work-life balance of busy Poles
Poles at the forefront of the most hard-working Europeans
Article20 years of EU membership: Poland’s GDP higher by 40%
A new PEI report confirms Poland’s civilizational leap since 2004
-
Event
Exploring the Swedish Digital Healthcare Ecosystem
Sweden consistently ranks among the top few in global healthcare systems’ efficiency and quality ran…
EventWinDoor-tech ’25
WinDoor-tech is the most important meeting with the participation of producers and distributors of m…
-
Institution
Polish-Romanian Bilateral Chamber of Commerce and Industry (PRBCC)
The Polish-Romanian Bilateral Chamber of Commerce and Industry is an independent organization that a…
InstitutionWielkopolska Chamber of Commerce
The Wielkopolska Chamber of Commerce undertakes initiatives related to the promotion of exports
-
PANELTECH SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ
Paneltech is a polish company producing thermal insulation and finishing materials for the construction industry. Many years of experience and investment in modern technological lines have allowed Paneltech to specialise in the production of high quality building materials, including expanded polystyrene, sandwich panels, flashings, elevation cassettes, aluminium joinery, modular coldrooms and coldroom and freezer doors. Paneltech exports products to over 30 countries worldwide.
PUH LEDNET BARTOSZ ORLICKI
Machinery and parts thereofIndustrial machinery and mechanical appliances and parts thereofMeasuring instruments and apparatus and parts thereofAgricultural machinery and parts thereofOther instruments and apparatusElectromechanical appliances and parts thereofOther goodsShow allWe are the producer and distributor of HVAC equipment and hydraulic devices. We already export regularly to 7 countries in Europe and casually to many more places. Our main product which makes our brand – NORDIC TEC – Europe-wide known is a Plate Heat Exchanger Set in exclusive offer.
GLOBPLAST SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ
Renovation and construction materialsShow allGLOBPLAST company specialise in the production and distribution of construction profiles made of aluminium, steel and PVC (Poli Vinyl Chloride) as well as the construction mesh, foil and membrane materials for thermal insulation and building insulation.Our original and innovative product is the specialized line of corners and aluminium and PVC profiles strengthened by a special mesh known as IRIS GLASS. This solution is dedicated to demanding internal and external building insulation systems.
JAKUB KORUS ILF-DESIGN STUDIO
ServicesCultural and recreational servicesBusiness servicesIT and TelecommunicationConstructionTravelTransport and courier servicesShow allA visual identity firm plays a crucial role in shaping a brand’s image by creating visually appealing and consistent elements such as logos, color palettes, typography, and graphic designs. These elements collectively form the brand’s visual identity, which helps consumers recognize and differentiate the brand from its competitors. When designing a visual identity, the firm considers various factors such as the brand’s target audience, values, personality, and positioning in the market. Thanks!
The Export Promotion Portal uses cookies to make it easier for users to use the website and for statistical purposes. If you do not block these files, you agree to their use and saving in the memory of your computer or other device. Remember that you can change your browser settings to block the storage of cookies. More information can be found in Privacy Policy and Terms and conditions.